Dentin Dysplasia Type I-Diagnosis and Treatment: Case Report- Juniper Publishers

 Juniper Publishers- Open Access Journal of Dentistry & Oral Health


Dentin Dysplasia Type I-Diagnosis and Treatment: Case Report- Juniper Publishers

Authored by Carmem Dolores Vilarinho Soares de Moura

Abstract

This paper aims to report the case of a child with dentin dysplasia type I. An 8 year old female child was referred to the Children's Dental Clinic of the Universidade Federal do Piauf with an aesthetic complaint caused by missing teeth. Four permanent first molars, premolar upper right and upper left permanent canine were present. There was satisfactory oral hygiene and no dental diseases. Anamnesis and laboratory tests did not detect any systemic disorders. Evaluations of initial panoramic radiographs and computed tomography showed permanent teeth with apparently normal crowns, with short and conical roots and obliteration of the pulp chamber, confirming the diagnostic hypothesis of Dentin Dysplasia type I. Root Dentin Dysplasia or Dentin Dysplasia type I is a rare hereditary autosomal dominant disorder, with a complex diagnosis, and the need for evaluation and interdisciplinary planning. There is no specific treatment for this genetic condition. Temporary mucosa-supported prosthesis reimbursed with resilient resin was made to preserve the sites of erupted teeth and those erupting. Monitoring is to be done until the growth of the facial structures is completed, allowing for rehabilitation with fixed prostheses on implants

Keywords: Pathology; Oral; Pediatric dentistry, Dentin dysplasia, Diagnosis, Dental care

Abbreviations: DDI: Dentina Dysplasia Type-I

Introduction

Dentin dysplasia is a rare hereditary autosomal dominant disorder, with prevalence of 1:100,000 [1,2] characterized by an altered dentin structure, aesthetic involvement and teeth that can present mobility, early exfoliation and association with abscesses or cysts [3-6].

Two phenotypes have been described [1]. Type I or root dentin dysplasia (DD I) can affect the two dentitions, and is characterized by a normal appearance of dental crowns, short, conical or missing roots, partial or total obliteration of the pulp chamber, and the presence of periodical cysts [2,3]. Type II or coronal dentin dysplasia (DD II) is more frequent in deciduous teeth, showing teeth with brown or blue amber discoloration and pulp obliteration. When DD II is present in the permanent dentition, the teeth have a normal appearance or slight discoloration and the presence of pulp nodules [2,3,7].

This paper aims to report the case of a child with dentin dysplasia type I.

Case Report

An 8 years old female was referred to the Children’s Dental Clinic of the Universidad Federal do Piauí with an aesthetic complaint caused by missing teeth (Figure 1). The teeth erupted and soon after exfoliated spontaneously. There was an alveolar ridge deficiency in the maxilla and mandible, and decreased vertical height due to missing teeth. The child presented introspective behavior and little collaborator for dental procedures.

There is no report of other family members with similar dental changes. In the first examination the following fully erupted teeth were present: four permanent first molars, premolar upper right and upper left permanent canine. There was satisfactory oral hygiene and no dental diseases. The teeth had normal color and the absence of mobility ( Figure 2).

Laboratory tests such as blood count, ionic calcium, phosphorus, serum iron, 17 alpha hydroxy progesterone, and rostenedione, alkaline phosphates total protein and fractions, A/G ratio, somatomedin and GH stimulation test after coniine did not detect any systemic disorders. Radiographs of hands and wrists showed images of bone development compatible with a 6-year- old child (Gilsanz-Ratib digital atlas for bone age estimations).

Evaluations of initial panoramic radiographs (Figure 3) and computed tomography showed permanent teeth in different stages of development, with apparently normal crowns, with short and conical roots and obliteration of the pulp chamber, confirming the diagnostic hypothesis of dysplasia dentine type I.

Due the psychological framework of the patient with social isolation behavior, which is a condition that worried the family, we opted for the placing of temporary mucosa-supported prosthesis reimbursed with resilient resin to preserve the sites of erupted teeth and those erupting. The child’s mother signed a written consent, allowing the case to be documented for publication in a scientific journal.

Moldings were made of the dental arches with Hydro gum ® (Zhermack clinical, Rovigo, Italia) and children’s trays, and then the molds were cast with a special plaster, type IV Drone (Dentsply, Petropolis-RJ, Brazil), to obtain the study design and manufacture of a custom tray in clear acrylic (Vipident plus, Pirassununga- SP, Brazil). This was used for the functional molding and to generate the working model; for this, Godiva stick type 1 (SDS Kerr, Joinville-SC, Brazil)was used in order to obtain an adequate sealing peripheral, and soft Politer Impregum™ Soft (3M ESPE, Neuss, Germany) for the molding itself. The working models were sent to the laboratory for the base-proof and wax plans.

In the second session, the base-proof and wax plans were tested, and the vertical dimension was defined using a Willis compass. This measurement was decreased 3mm to get the vertical height of occlusion. Markings were also made to set a high smile line and intercanine space, which in this case was made using the line of the pupils, and then the upper and lower planes were fixed with clips. The bases were replaced in the working model and the assembly was made in Articulator, semi-adjustable, Arson (Board) for mounting the teeth. Stock teeth 1D were selected to anterior maxillary, 3M to anterior mandible and 3M for posterior Vipident plus (VIPI, Pirassununga-SP, Brazil).

The patient returned to the proof of the teeth mounted in wax. In this session were made swallowing and phonetic tests, confirming ideal height of the vertical occlusion, without invasion of free functional space and without need for adjustments. After the choice the color of gingiva - medium pink (STG dentes ® ), the prostheses was remand to the laboratory for acrylization.

In the fourth session, the installation of the prostheses (Figure 4,5) was completed with relining with dense Soft Comfort ® resin (Decrial, Pirassununga-SP, Brazil). Small occlusal adjustments were made with Minicab Pmtungsten drills (Dedeco). After this step was completed, the prostheses were delivered and guidelines were given. The mother agreed that the patient would return bimonthly, or when the prosthesis was difficult to use, in order to make adjustments due to the eruptive process and/or tooth loss.

The patient returned three months after the making of the prosthesis for adjustments, due to tooth eruption 24. Adjustments to the prosthesis were made. Monitoring is to be done until the growth of the facial structures is completed, allowing for rehabilitation with fixed prostheses on implants.



Comments

Popular posts from this blog

The Effect of Pistacia Atlantica and Hypericum Perforatum as a Healing Accelerator Remedy on Induced Oral Mucositis in Male Golden Hamster- Juniper Publishers

Effective Use of Dental Implants and Prosthetics for Dental Missions: Clinical Case Presentations- Juniper Publishers

Guided Tissue Regeneration using an Equine Bio-absorbable Collagen Membrane with or without Equine Bone Graft in the Treatment of Intrabony Defects in Patients with Aggressive Periodontitis Results of 18 month- Juniper Publishers